सरोद
(सरोद)सरोद उत्तर भारत का बिना परदों वाला, छेड़कर बजने वाला ल्यूट है, जो स्टील के डाँड और 19 से 25 तारों पर तीन सप्तक तक फैला है; हिंदुस्तानी संगीत में इसे नारियल के खोल के प्लेक्ट्रम से बजाते हैं।
£800 - £5,000
Student sarods from established Indian makers start around £800, and professional concert instruments from master workshops in Kolkata or Gwalior cost £2,000 to £5,000. Compare designs too: count the melody, drone, chikari and sympathetic strings, since layouts differ by maker and lineage.
विधा के बारे में जानें
इस संगीत परंपरा, इसके साधकों और सीखने के तरीकों से परिचित हों।
इतिहास और उत्पत्ति
सरोद क्या है?
सरोद हिंदुस्तानी शास्त्रीय संगीत का बिना परदों वाला, छेड़कर बजने वाला ल्यूट है, और हमारा सरोद गंभीर विद्यार्थी और मंच के कलाकार, दोनों के लिए है। सागौन के तराशे कटोरे पर बकरी की खाल का पेट मढ़ा होता है, और वादक चमकाए हुए स्टील के डाँड पर तार रोकते हैं, जिससे तीखी शुरुआत और लंबी गूँज वाला साफ़, घंटी जैसा स्वर निकलता है। परदे न होने से मींड (लगातार फिसलन) पूरे डाँड पर चलती है। सरोद में 19 से 25 तार होते हैं: चार या पाँच बजाने के तार, आधार-स्वर और चिकारी के तार, और 15 तक तरब के तार, जो राग में मिलाए जाते हैं और धुन बजते ही गूँज उठते हैं। दायाँ हाथ जवा से तार छेड़ता है, जो नारियल के खोल का तिकोना प्लेक्ट्रम है। बायाँ हाथ घराने के अनुसार नाख़ूनों या उँगलियों के पोरों से तार रोकता है; स्टील पर नाख़ून गूँजता स्वर देते हैं। जवा घुड़च के पास पड़े या दूर, इससे स्वर गर्म से तीखा हो जाता है। नीचे और ऊपर के स्ट्रोक और पुल-ऑफ़ इसके उच्चारण गढ़ते हैं; नाख़ून का कोण और दबाव सुर तय करते हैं, और तबला वादक देखते हैं कि हर मींड ताल से ज़रा हटकर कहाँ उतरती है। द्रुत गत में इसकी गमक और तेज़ मींड लय का भार उठाती हैं।
सरोद अफगान रबाब से निकला। 19वीं सदी में सेनिया-बंगश और लखनऊ-शाहजहाँपुर परंपराओं ने इसे गढ़ा, और 20वीं सदी में हाफिज अली खान (1888–1972) और मैहर के अलाउद्दीन खान (लगभग 1862–1972) ने इसका शास्त्रीय रूप तय किया। अमान अली बंगश और अयान अली बंगश अपने पिता अमजद अली खान की सेनिया-बंगश परंपरा आगे ले जा रहे हैं।
सरोद की वंश-परंपरा अफगान रबाब से होकर चलती है, जो छोटी डाँडी वाला ल्यूट है और मध्य एशिया, अफगानिस्तान और पश्तून इलाक़े में लोक, दरबारी और भक्ति संगीत में बजता रहा है। 18वीं सदी से अफगान संगीतकार अपने साथ रबाब लेकर मुगल दरबार में आने लगे। गुलाम बंदेगी खान बंगश 18वीं सदी के आख़िर में लखनऊ में बसे और उन्होंने इस वाद्य को हिंदुस्तानी शास्त्रीय प्रस्तुति के लिए ढाला: ताँत के परदे हटाए, चिकना स्टील का डाँड लगाया, तरब के तार जोड़े और अनुनाद वाला कटोरा गहरा किया। उनके बेटे गुलाम अली खान बंगश ने यह निखार जारी रखा। इन बदलावों से वह वाद्य बना जिसे उनके वंशज 19वीं सदी में सेनिया-बंगश घराने के रूप में आगे ले गए।
20वीं सदी की दो हस्तियों ने सरोद का शास्त्रीय रूप तय किया। हाफिज अली खान (1888–1972) ने बंगश परंपरा में तालीम पाई और आलाप, जोड़ और गत रचनाओं का औपचारिक रचना-भंडार खड़ा किया। अलाउद्दीन खान (लगभग 1862–1972) ने वाद्य को नए सिरे से गढ़ा, सागौन के बड़े ढाँचे, चौड़े डाँड और बढ़ाए गए तरब के तारों के साथ, जिससे आवाज़ दूर तक जाने लगी और गूँज लंबी हुई। उन्होंने मैहर में संगीतकारों की एक पीढ़ी तैयार की: उनके बेटे अली अकबर खान और दामाद रवि शंकर, दोनों ने 1950 के दशक से यूरोप और उत्तरी अमेरिका में प्रस्तुतियाँ दीं। सरोद विदेश में पहचाने गए पहले हिंदुस्तानी वाद्यों में से एक बना। अलाउद्दीन खान की शिक्षण परंपरा, मैहर घराना, आज के सरोद वादन की प्रमुख परंपरा है।
हाफिज अली खान के बेटे अमजद अली खान ने आज़ादी के बाद के दौर में इस वाद्य को सबसे बड़ी सार्वजनिक पहचान दी है। 1970 के दशक से भारत और विदेश में उनकी रिकॉर्डिंग, टेलीविज़न पर प्रस्तुतियों और कॉन्सर्टों ने सरोद को हिंदुस्तानी कॉन्सर्टों का मुख्य आकर्षण बना दिया। उनके बेटे अमान अली बंगश और अयान अली बंगश भी सरोद बजाते हैं; इस वाद्य पर बंगश परिवार की परंपरा अब छह पीढ़ियों तक फैली है। अली अकबर खान के बेटे आशीष खान ने मैहर परंपरा को आगे बढ़ाया; पार्थो सारथी 1990 के दशक से सरोद को जैज़ और वर्ल्ड म्यूज़िक के सहयोगों तक ले गए।
निर्माण और शिल्पकारी
निर्माण प्रक्रिया
कारीगर सरोद को सागौन (Tectona grandis) या तून (Toona ciliata) के एक ही टुकड़े से तराशते हैं; ज़्यादातर सरोद सागौन के होते हैं, जिसका घनत्व और रेशे गर्म, केंद्रित और दूर तक जाने वाला स्वर देते हैं, और कुछ निर्माता शहतूत इस्तेमाल करते हैं। ऊपर का संकरा हिस्सा डाँडी थामता है और नीचे का गहरा कटोरा अनुनादक बनता है, जिस पर तानी हुई बकरी की खाल ध्वनि-पटल का काम करती है। ज़्यादातर निर्माता कोलकाता में काम करते हैं, जहाँ बकरी की खाल आसानी से मिलती है।
स्टील का डाँड आईने जैसा चमकाया जाता है, ताकि नाख़ून बिना अटके फिसलें। धातु लिपटे चार या पाँच बजाने के तार, कुछ में सबसे नीचे का तार काँसे का, हड्डी या हाथीदाँत के घुड़च के ऊपर से टेलपीस तक जाते हैं। चिकारी के आधार-स्वर तार दाईं ओर ऊँचे लगे होते हैं और षड्ज और पंचम में मिलाए जाते हैं; तरब के तार घुड़च के छेदों से होकर नीचे चलते हैं, हर एक राग के किसी स्वर में मिला हुआ, कुल 19 से 25 तार।
जवा प्लेक्ट्रम नारियल के खोल का, या आबनूस, सींग, हड्डी या डेलरिन का गोल कोनों वाला तिकोना टुकड़ा है, जिसे अँगूठे और तर्जनी के बीच पकड़ा जाता है। नाख़ूनों से तार रोकने वाले वादक उन्हें लंबा बढ़ाते हैं, चिकनी गोलाई में रेतते हैं और टूटने से बचाते हैं, क्योंकि टूटा नाख़ून मींड तोड़ देता है।
रखरखाव और देखभाल
- सुर मिलाना: हर बार बजाने से पहले क्रोमैटिक ट्यूनर और खूँटी की चाबी से हर तार मिलाएँ; तरब के बारीक तार सूखी हवा में चढ़ जाते हैं और समय लेते हैं, इसलिए इन्हें अपनी दिनचर्या का हिस्सा बनाएँ।
- बकरी की खाल: सागौन गर्मी और ठंड झेल लेता है; बकरी की खाल नहीं झेलती। खाल को सीलन और नमी के अचानक बदलाव से दूर रखें; गीली खाल ढीली पड़ जाती है। नमी में बजाने के बाद सरोद को सूखे कमरे में मुँह ऊपर करके रखें। सूखे मौसम में खाल के किनारे पर, बीच में नहीं, नारियल तेल की पतली परत उसे लचीला रखती है।
- डाँड: हर बार बजाने के बाद इसे पोंछकर सुखाएँ, क्योंकि नम मौसम में ज़ंग लगता है और नाख़ून को अटकाता है; पानी या सॉल्वेंट कभी इस्तेमाल न करें। हल्का ज़ंग बारीक स्टील वूल से हटाएँ, फिर कैमेलिया तेल की हल्की परत लगाएँ।
- नाख़ून: तार रोकने वाले नाख़ूनों को हर दो-तीन दिन में चिकनी, एकसार गोलाई में रेतें; गिटार वादकों के नाख़ून सख़्त करने वाले लेप मदद करते हैं।
- रखना: डाँडी को सहारा देने वाला सख़्त केस इस्तेमाल करें, धूप या ठंड में खड़ी गाड़ी में कभी न छोड़ें, और तरब के तारों को तनाव में रखें, ताकि घुड़च और तारों की सीध ठीक बनी रहे।
तकनीकी विनिर्देश
सरोद के विस्तृत विनिर्देश
भौतिक माप
| विनिर्देश | मान |
|---|---|
| Body length | 95–105 cm |
| Body width (lower bout) | 28–32 cm |
| Neck length | 50–55 cm |
| Fingerboard length | 48–52 cm |
| Weight | 2–3 kg |
ढाँचा और बनावट
| विनिर्देश | मान |
|---|---|
| Body wood | Teak (Tectona grandis) or tun wood; some makers use mulberry |
| Construction method | Carved single block with separate resonator bowl |
| Resonator covering | Stretched goatskin membrane |
| Fingerboard material | Polished steel |
| Surface finish | Lacquered wood and metal fittings |
तार प्रणाली
| विनिर्देश | मान |
|---|---|
| Main playing strings | 4–5 (steel wound with metal) |
| Drone strings (chikari) | 4–5 |
| Sympathetic strings (tarab) | 10–15 |
| Total strings | 19–25 |
| String material | Wound metal (main), with a bronze lowest string on some sarods; plain steel (sympathetic) |
बजाने के उपकरण
| विनिर्देश | मान |
|---|---|
| Plectrum name | Java (javaa) |
| Plectrum material | Coconut shell; also ebony, horn, bone or Delrin |
| Left-hand technique | Fingernail or fingertip press on the steel fingerboard, by school |
| Fingernail requirement | Ring and index finger nails grown, filed and hardened; stopping fingers vary by player |
| Playing position | Seated cross-legged; instrument across the lap, neck to the left |
ध्वनि की विशेषताएँ
| विनिर्देश | मान |
|---|---|
| Tonal character | Sharp attack, warm resonant sustain (sympathetic strings) |
| Sustain | Medium to long (sympathetic string resonance) |
| Meend capacity | Full (fretless fingerboard allows continuous pitch slide) |
| Dynamic range | Whisper to full projection |
| Projection | High (concert hall volume without amplification) |
Available Instruments
Browse our curated selection of सरोदs
Showing 1 instruments
Looking for Something Unique?
Contact us for custom-made instruments tailored to your specific requirements
Contact for Custom OrderSarod में निपुणता की आपकी यात्रा
शुरुआत से लेकर दक्ष कलाकार बनने तक इस क्रमबद्ध मार्ग पर चलें
बैठने की मुद्रा, प्लेक्ट्रम की पकड़ और बुनियादी आघात
डाँड पर संचालन और नाखून की तकनीक
मींड और गमक के अलंकरण
राग विस्तार और रचना
प्रस्तुति का अभ्यास: आलाप से द्रुत गत तक
Frequently Asked Questions
What is the sarod, and where does it come from?
The sarod is a fretless plucked lute of Hindustani classical music, classed by museums as a necked bowl lute. A goatskin belly covers the face of a wooden bowl, usually teak, and the player stops the strings on a smooth metal fingerboard. Its immediate precursor is the Afghan rabab, carried into North India by Pashtun musicians.
How can a beginner, a child or an adult returning after a long break start learning the sarod?
You can learn the sarod with KalaSudha online and in workshops, starting at Foundation level. That first stage teaches your posture and the grip on the java, the coconut-shell plectrum, with slow, even strokes. Children learn with us as well as adults: ask us about a starting age, and about a sarod size for a younger learner.
After a long break, our courses let you start again where you left off, because they run in levels. Your teacher reviews where you stand first.
What materials is a sarod made from?
Most sarods have a teak body, and some are made of mulberry. Goatskin stretched across the face of the bowl forms the belly. The fingerboard is a metal plate, polished stainless steel or chrome- or nickel-plated cast steel, and bone serves for the bridge on one museum example. The triangular plectrum, the java, is most often coconut shell.
How long and how heavy is a sarod?
Catalogued sarods measure from 84.4 cm to 108 cm long and about 24.5 to 29 cm wide. A Kolkata sarod of 1877 measures 84.4 cm and weighs 2.7 kg, while the V&A's Varanasi sarod of about 1850 measures 96 cm. A modern Kolkata instrument in Berlin measures 108 cm and weighs 5.04 kg.
How many strings does a sarod have, and how are they arranged?
A conventional sarod carries 17 to 25 strings, and the larger Maihar design carries 25. Amjad Ali Khan's sarod has four melody strings, usually tuned doh, fa, doh, mi, with the lowest in bronze, plus two drone strings, two chikari strings and 11 sympathetic strings. Other players use more sympathetic strings.
How is the sarod held and played?
The sarod player plucks with a triangular plectrum, the java or jaba, most often of coconut shell. The V&A describes the seated position: the instrument held in front of the body with its wide end resting on the right thigh. The smooth metal fingerboard lets the player slide across many notes, which a fretted instrument such as the rabab cannot do.
Who are some of the best-known sarod players?
Ali Akbar Khan (1922 to 2009) trained on the sarod with his father from childhood, and in 1955 visited the United States at Yehudi Menuhin's invitation. Amjad Ali Khan, born in Gwalior in 1945, is the son and pupil of Hafiz Ali Khan and describes himself as the sixth generation of sarod players in his family. His sons Amaan Ali Bangash and Ayaan Ali Bangash are the seventh.
Who invented the sarod, and when?
The origin of the sarod is contested. The Bangash family says Ghulam Ali Khan Bangash, a Gwalior court musician, transformed the Afghan rabab his grandfather had brought to India. Amjad Ali Khan says his forefathers replaced the rabab's fretted wooden neck with a steel fingerboard and its gut strings with steel. A V&A sarod made in Varanasi about 1850 shows the name was in use by the mid-19th century.
How does the Maihar sarod differ from a conventional sarod?
The Maihar sarod is a larger design with 25 strings, usually tuned to C. The conventional sarod carries 17 to 25 strings and is usually tuned to B. A third design, from the school of Radhika Mohan Maitra, may carry a second resonator. All three keep the goatskin belly and the smooth metal fingerboard.
How does the sarod differ from the Afghan rabab?
The Afghan rabab is the immediate precursor of the sarod, carried into North India by Pashtun musicians. The rabab has a fretted wooden neck; in Amjad Ali Khan's account, his forefathers replaced it with a smooth steel fingerboard and changed gut strings for steel. That fingerboard lets a sarod player slide across many notes, which the fretted rabab cannot do.
Which type of sarod should I buy?
When buying a sarod, choose the design first. The conventional sarod carries 17 to 25 strings and is usually tuned to B. The Maihar design is larger, with 25 strings, usually tuned to C, and instruments of Radhika Mohan Maitra's school may carry a second resonator. Most sarod makers work in Kolkata, where goatskins are readily available.
Where can I buy a sarod outside India, with international shipping, strings and repair or service after the sale?
KalaSudha sells the sarod worldwide, by quote or made to order, so you can buy one outside India and have it delivered. Your sarod leaves us packed for international shipping, and we can advise on cases and insurance.
We service and repair any sarod, wherever you bought it and wherever you live. Strings and spare parts come from us as well. For help with your sarod after the sale, use the chat on any page or email [email protected]. Ask us also about gift vouchers or class sets for schools, and about a flight case for travel.
How do I book a sarod player for a concert, a private event or a recording session?
Yes, you can book a sarod player through KalaSudha for a concert, event or recording. Send your request through our page to book Indian classical musicians. To hear our artists before you book, browse KalaSudha's recordings and concert videos.
Have more questions? Contact our support team and we'll be happy to help!
सरोद सीखना शुरू करने के लिए तैयार हैं?
अपने लिए कोटेशन पाएँ और पाठ्यक्रम देखें