Chordophones তত বাদ্য (কর্ডোফোন): দণ্ড বা নল জিথার (হর্নবোস্টেল-সাকস 311.222) Advanced উত্তর ভারত (ধ্রুপদ ঐতিহ্য; মধ্যযুগীয় মোগল দরবারের কাল) Dhrupad veena Ancient lineage

রুদ্র বীণা

(रुद्र वीणा)

রুদ্র বীণা, বা বীন, ধ্রুপদের বীণা: বাঁশ বা সেগুনের নল, দুটি তুম্বার অনুনাদক, চারটি প্রধান তার আর স্থির পিতলের পর্দা। সেনিয়া ও ডাগর ধারায় এতে ধীর আলাপ বাজে।

মূল্যের পরিসর

£800 - £5,000

Student rudra veenas from specialist Indian workshops start around £800; intermediate instruments with better gourds and bridge work cost £1,500 to £2,500; concert instruments built to order by senior makers in Varanasi or Miraj reach £5,000 and above. Choose between the traditional and Dagar designs, and check older instruments for ivory.

Violin-Instrument

এই সঙ্গীত ঐতিহ্য, এর শিল্পী ও শেখার উপায়গুলির সঙ্গে পরিচিত হন।

ইতিহাস ও উৎপত্তি

রুদ্র বীণা কী?

রুদ্র বীণা, বা বীন, ধ্রুপদ-এর টোকা দিয়ে বাজানো দণ্ড জিথার, উত্তর ভারতে আজও বাজানো প্রাচীনতম তারযন্ত্রগুলোর একটি, আর আমাদের রুদ্র বীণা ধ্রুপদের ছাত্র ও বিশেষজ্ঞ দুজনেরই উপযোগী। নামের অর্থ "রুদ্রের বীণা", রুদ্র শিবের একটি রূপ। বাঁশ বা সেগুনের একটি ফাঁপা নলে থাকে মোমে বসানো ২১ থেকে ২৪টি উঁচু পিতলের পর্দা, চারটি প্রধান তার আর তিনটি চিকারি ড্রোন, সঙ্গে দুটি বড় তুম্বার অনুনাদক।

সেরা রুদ্র বীণার গুণ

উঁচু পর্দায় মীড় সম্ভব, পাশে টেনে স্বরকে একটি মাইনর থার্ড বা তার বেশি, পঞ্চম পর্যন্ত চড়ানো। হাড় বা হরিণের শিংয়ের ব্রিজ জোয়ারির ঝংকার দেয়, আর তুম্বা ও লম্বা স্কেল নিচের দুই সপ্তকে ঘর-ভরানো গভীর স্থায়িত্ব দেয়। জিয়া মোহিউদ্দিন ডাগর তুম্বা আর নল বড় করেন, তাই বাদকেরা এখন প্রথাগত উত্তরী নকশা আর তাঁর ভারী নকশার মধ্যে বেছে নেন। প্রথাগত ভঙ্গিতে যন্ত্রটি তির্যকভাবে থাকে, একটি তুম্বা বাঁ কাঁধে, অন্যটি ডান উরুতে।

কীভাবে বাজানো হয়

অনুষ্ঠানের বেশির ভাগই আলাপ, সংগত ছাড়া রাগের ধীর বিস্তার, প্রায়ই এক ঘণ্টা বা তার বেশি, তারপর জোড় আর ঝালা, আর চৌতাল, ধামার বা তীব্রায় বন্দিশের জন্য যোগ দেয় পাখোয়াজ। বাক্যাংশের ফাঁকে চিকারির আঘাত ষড়জ আর পঞ্চম ধরে রাখে, আর গমক নিচের তারে ভারী স্পন্দন দেয়। আসাদ আলি খানের ছাত্রেরা আর ডাগর পরিবার এটি বাজান; ধ্রুপদের বৃত্তের বাইরে এটি বিরল।

আনুমানিক ১০ শতক থেকে সংস্কৃত সংগীতগ্রন্থে রুদ্র বীণার উল্লেখ মেলে সবচেয়ে মর্যাদাপূর্ণ টোকা দিয়ে বাজানো যন্ত্রগুলোর মধ্যে, তত্ত্বে রুদ্রের কাছে পবিত্র, যদিও এর চর্চা বেড়েছে মধ্যযুগের দরবারে। মোগল পৃষ্ঠপোষকতায় এটি হয়ে ওঠে ধ্রুপদের প্রধান বাহক, যে ধ্রুপদ ধীর, স্বরবিন্যাসনির্ভর আর রাগে প্রোথিত।

আকবরের দরবারি সংগীতশিল্পী তানসেনের (আনুমানিক ১৫০০–১৫৮৯) নামে সেনিয়া ঘরানা ১৬ শতকে এর কেন্দ্রীয় শিক্ষাধারা গড়ে; ঐতিহ্য অনুযায়ী তানসেন গানের পাশাপাশি এই যন্ত্রেও দক্ষ ছিলেন। তাঁর বংশধর আর শিষ্যেরা ১৭ ও ১৮ শতক জুড়ে এটি বহন করেন, আর দবির খানের পরিবার ২০ শতক পর্যন্ত। জয়পুর আর রামপুরের দরবারেও বীণার ধারা বেঁচে ছিল।

জিয়া মোহিউদ্দিন ডাগর (১৯২৯–১৯৯০) তাঁর বাবা নাসির মইনুদ্দিন ডাগরের কাছে তালিম নেন এবং প্রায় বিস্মৃতি থেকে রুদ্র বীণাকে ফিরিয়ে আনেন, দুই থেকে তিন ঘণ্টার কনসার্টে, যার অর্ধেক আলাপ, ধ্রুপদের মাপেও দীর্ঘ। ১৯৭০ ও ১৯৮০-এর দশকে তাঁর রেকর্ডিং, যার অনেকগুলো আকাশবাণীর জন্য করা আর পরে প্রকাশিত, আজও শিক্ষার্থীরা মন দিয়ে শোনেন। জয়পুরের বীনকার ঘরানার আসাদ আলি খান (১৯৩৭–২০১১), ২০ শতকের অন্য শীর্ষ বাদক, একটি সমান্তরাল ধারা বজায় রাখেন। বাহাউদ্দিন ডাগর ডাগর ধারা এগিয়ে নিয়ে যাচ্ছেন, আর দুই ধারার ছাত্রেরাই ভারতে ও বিদেশে বাজান ও শেখান।

নির্মাণ ও কারিগরি

নির্মাণ প্রক্রিয়া

যন্ত্রের শরীর, ডাঁড়ি, বাঁশ-এর একটি ফাঁপা নল, নতুন যন্ত্রে সিজন করা সেগুন বা রোজউডের, 120–130 cm লম্বা, যার ফাঁপা ভেতর ব্রিজ থেকে কম্পন তুম্বায় পৌঁছে দেয়। এর নিচে বসে দুটি বড় শুকনো লাউ, তুম্বা, প্রথাগত যন্ত্রে গালা-মাখানো সুতোয় বাঁধা আর কিছু যন্ত্রে রিং, ওয়াশার ও নাট দিয়ে আঁটা। বড় তুম্বা গভীর অনুরণন দেয় কিন্তু ওজন বাড়ায়, আর সমান দেয়ালের, ফাটলহীন তুম্বা বাছাইয়েই সবচেয়ে বেশি সময় যায়।

২১ থেকে ২৪টি পর্দা, বাঁকা কাঠের ভিত্তির ওপর মোমে বসানো পিতলের পাত, বেশির ভাগ কনসার্ট মডেলে ২৪টি। স্থির পর্দা প্রতিটি রাগের জন্য সরানো যায় না, তবে তারকে আরও দূর পর্যন্ত ঠেলতে দেয়। চারটি ভারী প্রধান তার আর তিনটি চিকারি হাড়ের নাট থেকে হাড় বা হরিণের শিংয়ের জোয়ারি ব্রিজের ওপর দিয়ে টেলপিস পর্যন্ত যায়। ঝংকার আর স্থায়িত্বের ভারসাম্য আনতে নির্মাতা ঘণ্টার পর ঘণ্টা এটি ঘষেন, আর প্রতিটি নতুন ব্রিজে এবং নতুন তারের গেজ আলাদা হলেই কাজটি আবার করেন। মিজরাব তর্জনীতে পরা হাড় বা ধাতুর মোটা আংটি, সেতারের মিজরাবের চেয়ে বড়, ভারী তারের জন্য চওড়া সমতল ডগাসহ।

জিয়া মোহিউদ্দিন ডাগর কলকাতার কানাইলাল অ্যান্ড ব্রাদারের সঙ্গে মিলে তুম্বা আর নল বড় করেন।

রক্ষণাবেক্ষণ ও যত্ন

  • দুটি বড় তুম্বা যন্ত্রের সবচেয়ে ভঙ্গুর অংশ। রুদ্র বীণা গদি-আঁটা শক্ত কেসে রাখুন, দুটি তুম্বাকেই ভর আর গদি দিয়ে; তুম্বার নিচে গদি ছাড়া যন্ত্রটি কখনও শক্ত তলে রাখবেন না। আর্দ্রতার দ্রুত বদল এড়িয়ে চলুন: শুকনো লাউ খুব তাড়াতাড়ি আর্দ্রতা হারালে স্বাভাবিক জোড়ের রেখা ধরে ফাটতে পারে। শুকনো আবহাওয়ায় (40% RH-এর নিচে) বন্ধ কেসের ভেতরে জলভরা ছোট খোলা পাত্র রাখুন, যাতে আশপাশের আর্দ্রতা বাড়ে। কোনও তুম্বাকেই সরাসরি তাপ বা রোদে রাখবেন না।
  • পিতলের পর্দা সুতোয় বাঁধা নয়, মোমে বসানো। প্রতিটি অনুষ্ঠানের আগে দেখে নিন কোনও পর্দা সরে বা আলগা হয়ে যায়নি; আলগা পর্দা খটখটে ঝনঝন তোলে, যা জোয়ারির সুর ঢেকে দেয়। আঙুলের চাপে পর্দা নড়লে যন্ত্রের মোম (বা গাঢ় মৌমাছির মোম) দিয়ে আবার বসান: মোম গরম করুন আর ঠান্ডা না হওয়া পর্যন্ত পর্দার খিলান জোরে চেপে ধরুন। জায়গায় মেরামতের জন্য কেসে এক টুকরো মোম রাখুন। আঠা ব্যবহার করবেন না: মোমে বসানো পর্দা নলের ক্ষতি না করে সরানো বা খোলা যায়।
  • হাড় বা হরিণের শিংয়ের ব্রিজ বীণার সেই চেনা জোয়ারি ঝংকার তৈরি করে। আমাদের পরামর্শ ছাড়া ব্রিজ ঘষবেন না বা উকো দেবেন না; ব্রিজের গড়নে সামান্য বদলও জোয়ারির ভারসাম্য বদলে দেয়। ঝংকার হারিয়ে গেলে বা কর্কশ হলে যন্ত্রটি আমাদের কাছে নিয়ে আসুন। যাতায়াতের সময় তার যেখানে ব্রিজ পেরোয় সে জায়গা নরম কাপড়ে মুড়ে দিন, যাতে তারের নিচে ব্রিজ সরে জোয়ারির গড়ন না বদলায়।
  • প্রতিবার বাজানোর আগে পেগ কি দিয়ে তারগুলো সুরে বাঁধুন। ভারী প্রধান তারের সুর আর্দ্রতায় সহজে সরে যায়; অনুষ্ঠানের জন্য সুর বাঁধার আগে নতুন পরিবেশে যন্ত্রটিকে 10–15 মিনিট মানিয়ে নিতে দিন। যে তারে মরচে, ভাঁজ বা উজ্জ্বলতার ঘাটতি দেখা যায়, তা বদলান; ব্রিজের টান সমান রাখতে প্রধান তারের পুরো সেট একসঙ্গে বদলান। ড্রোনের তার প্রধান তারের চেয়ে বেশি ছেঁড়ে; প্রতিটি গেজের একটি পুরো বাড়তি সেট কেসে রাখুন।
  • বাঁশ বা সেগুনের নল আর তুম্বার সংযোগের মাঝের জোড় যন্ত্রের গঠনগত দুর্বল জায়গা। বছরে একবার প্রতিটি তুম্বার সংযোগে সুতোর বাঁধন দেখুন; সুতো ফেঁসে গেলে বা নলের তুলনায় তুম্বা সামান্য নড়লে, জোড় ভেঙে পড়ার আগে মেরামত দরকার। যন্ত্রটিকে চরম তাপমাত্রা থেকে দূরে রাখুন, যাতে নল আর তুম্বা আলাদা হারে প্রসারিত ও সংকুচিত না হয়। নলে লম্বালম্বি সামান্য ফাটলও দেখলে, ফাটল পর্দার অংশে পৌঁছানোর আগে যন্ত্রটি আমাদের কাছে পাঠান।

প্রযুক্তিগত বিবরণ

রুদ্র বীণা-এর বিস্তারিত বিবরণ

আকার ও মাপ
আকার ও মাপ বিবরণ
বিবরণ Value
Total instrument length 120–130 cm
Gourd diameter 22–30 cm per gourd
Tube diameter 4–6 cm
Fret count 21–24 (24 fixed brass arches on most concert instruments)
Weight 3–5 kg
কাঠামো ও গঠন
কাঠামো ও গঠন বিবরণ
বিবরণ Value
Tube material Bamboo (traditional) or teak or rosewood (modern)
Resonators Two large dried gourds (tumba), one at each end
Fret material Thick brass arches on curved wooden bases, set with wax into the tube
Nut and tailpiece Bone nut at the upper end; metal tailpiece at the lower end
Finish Lacquered thread binding at the gourd joints; polished tube
তারের ব্যবস্থা
তারের ব্যবস্থা বিবরণ
বিবরণ Value
Main playing strings 4 (heavy-gauge steel or steel-wound bronze)
Drone strings (chikari) 3
Total strings 7 (8 with a separate laraj drone)
String scale length Approx. 90–100 cm (nut to bridge)
Bridge Bone or deer-horn jawari bridge
বাজানোর সরঞ্জাম
বাজানোর সরঞ্জাম বিবরণ
বিবরণ Value
Plectrum name Mizrab
Plectrum material Bone or wire-wound metal ring with a wide striking tip; traditional plectra on the first and second fingers
Right-hand technique Downstroke (da) dominant; upstroke (ra) in jhala; little finger strums the chikari
Left-hand technique Fingertip press behind the fret; sideways meend push up to a fifth
Playing position Diagonal: upper gourd on the left shoulder, lower on the right thigh; in sukhasan one gourd rests on the floor
ধ্বনির বৈশিষ্ট্য
ধ্বনির বৈশিষ্ট্য বিবরণ
বিবরণ Value
Tonal character Deep bass with jawari buzz and long sustain
Sustain Long (large gourd volume and fixed-tube resonance)
Optimal use Dhrupad-ang alap in lower and middle octaves
Dynamic range Soft to full bass projection
Projection Medium (concert room; lower than amplified stage instruments)

Available Instruments

Browse our curated selection of রুদ্র বীণাs

Showing 1 instruments

Looking for Something Unique?

Contact us for custom-made instruments tailored to your specific requirements

Contact for Custom Order

Rudra Veena-এ দক্ষতার পথে আপনার যাত্রা

একেবারে শুরু থেকে দক্ষ শিল্পী হওয়া পর্যন্ত এই ধাপে ধাপে পথ অনুসরণ করুন

1

বসার ভঙ্গি ও মিজরাব ধরা

নিজের ধারার শিক্ষা অনুযায়ী প্রথাগত ভঙ্গি শিখুন, যন্ত্র তির্যকভাবে, ওপরের তুম্বা বাঁ কাঁধে আর নিচেরটি ডান উরুতে, অথবা সুখাসন ভঙ্গি, একটি তুম্বা মেঝেতে রেখে। মিজরাব পরুন আর একক নিচের আঘাত খুব ধীরে বাজান, প্রতিটি স্বরের পুরো রেশ আর জোয়ারি শুনে। দীর্ঘ আলাপ জুড়ে স্থির থাকার শক্তি গড়ুন।
20%
2

স্থির পর্দায় চলাচল ও মীড়

প্রথম রাগের জন্য ২১ থেকে ২৪টি পর্দার অবস্থান শিখুন। তারপর মীড় গড়ুন: উঁচু, স্থির পিতলের পর্দার ওপর তার পাশে ঠেলুন, ভারী তারে সত্যিকারের জোর দিয়ে, জোয়ারি বাজতে থাকা অবস্থায় এক মীড়ে মাইনর থার্ড ছাড়িয়ে পুরো পঞ্চমের দিকে পৌঁছে।
40%
3

ধ্রুপদ অঙ্গের আলাপের কাঠামো

ধ্রুপদের আলাপের পদ্ধতি শিখুন: নিচের সপ্তকে একক স্বর আর ছোট বাক্যাংশ দিয়ে শুরু করুন, রাগ যেমন অনুমতি দেয় তেমন করে প্রতিটি স্বর আনুন আর 30 থেকে 60 মিনিটে ওপরের সপ্তকের দিকে বিস্তার করুন। পরের বাক্যাংশের আগে প্রতিটি বাক্যাংশকে থিতু হয়ে বাজতে দিন; এত দীর্ঘস্থায়ী যন্ত্রে ঠাসা বাক্যগঠন জঞ্জালের মতো শোনায়।
60%
4

জোড়, ঝালা ও গমক

আলাপের পর জোড় যোগ করুন, নির্দিষ্ট তাল ছাড়া মিজরাব থেকে স্থির স্পন্দন। গমক গড়ুন, পর্দা আর মীড়ের মাঝে স্বরের দ্রুত দোলন, যা বীণার ধ্রুপদকে ভারী অলংকার দেয়, তারপর ঝালা, প্রধান তার আর চিকারির মধ্যে দ্রুত পালাক্রমের আঘাত, ছোট ছোট ধাপে গতি বাড়িয়ে।
80%
5

রাগের রচনাসম্ভার ও কনসার্ট অনুশীলন

বেস স্বর আর স্থির পর্দার মীড়ের উপযোগী রাগে রচনাসম্ভার গড়ুন: ভৈরব, ইমন, দরবারি কানাড়া, মালকোষ আর ললিত। পূর্ণ আলাপ, জোড় ও ঝালা অভ্যাস করুন, তারপর পাখোয়াজের সঙ্গে চৌতাল বা ধামারে একটি বন্দিশ। জিয়া মোহিউদ্দিন ডাগর আর আসাদ আলি খানের রেকর্ডিং শুনে শিখুন।
100%

Frequently Asked Questions

What is the rudra veena, or bin, of Hindustani music?

The rudra veena, called the bin or been in North India, is a plucked stick zither of Hindustani music. A hollow tube of bamboo or teak carries the frets and strings, with two calabash gourd resonators beneath. It has four melody strings and three chikari drone strings. The Met notes that it appears routinely in ragamala paintings and is closely associated with dhrupad.

How can a beginner, a child or a returning player start learning the rudra veena, the bin of dhrupad?

You can learn the rudra veena with KalaSudha online and in workshops, and beginners start at Foundation level. Foundation teaches the traditional posture, one gourd on the left shoulder and the other on the right thigh, and slow single strokes with the mizrab. Children learn with us as well as adults: ask us about a starting age and about a size for a younger learner.

Players returning after a long break start again where they left off. Our courses run in levels, and your teacher reviews where you stand first.

Where can I buy a rudra veena outside India, with international shipping and service after the sale?

KalaSudha sells the rudra veena to players outside India, by quote or made to order, and delivers worldwide. We pack each instrument for international shipping; ask us about cases and insurance.

We service and repair any rudra veena, wherever you bought it, in any country. Strings and spare parts are available from us too. For help with your instrument after the sale, ask us through the chat on any page or at [email protected]. You can also ask us about gift vouchers, class sets for schools and flight cases for travel.

How long and how heavy is a rudra veena?

Museum examples of the rudra veena measure 125 to 143.5 cm overall, and the gourd resonators are about 34 to 37 cm across. One instrument in Berlin weighs 3.5 kg. The design of Zia Mohiuddin Dagar is larger: he enlarged the gourds and the hollow tube to gain resonance and longer sustain.

Where are rudra veenas made?

The documented 20th-century centre of rudra veena making is Kolkata. There the firm Kanailal & Brother built instruments to Zia Mohiuddin Dagar's enlarged design, and the maker Murari Adhikari (1934 to 2006) was co-designer of the enlarged instrument in the 1960s. The Horniman Museum holds a Kanailal & Brother instrument of about 1960 to 1980.

What does the name rudra veena mean?

The name rudra veena, or rudra vina, means "the veena of Rudra", and Rudra is an epithet of Shiva. In North India the instrument is called the bin, also spelt been. Organologists class it as a stick zither, and the Met notes that it appears routinely in ragamala paintings, closely associated with dhrupad.

How is the rudra veena held?

Players hold the rudra veena at a slant in front of the chest, with one gourd resting on the left shoulder and the other on the right knee, as Alain Daniélou describes in his notes for the UNESCO Collection. The two gourd resonators hang beneath the neck on metal tubes. The right hand plucks the strings with steel picks worn on the index, middle and little fingers.

Who are the best-known rudra veena players?

Darbar names Asad Ali Khan and Zia Mohiuddin Dagar as the masters who kept the rudra veena's legacy alive, within the Khandarbani and Dagar traditions of dhrupad. Zia Mohiuddin Dagar's son, Mohi Bahauddin Dagar, is widely recognised as a virtuoso of the instrument and received the Sangeet Natak Akademi award in 2012. Darbar also names Jyoti Hegde as one of the few women to master it.

How old is the rudra veena?

Tradition holds that the sage Bharata created the rudra veena, and that origin remains a legend. Alain Daniélou, in his UNESCO Collection notes, calls it the most ancient Indian fretted zither; its oldest known examples, from the 6th to 10th century, have one gourd. He adds that many 15th- and 16th-century paintings depict it. Today it belongs to dhrupad, carried by players of the Dagar and Khandarbani traditions.

How does the rudra veena differ from the Saraswati veena?

The rudra veena of Hindustani music is a stick zither: a hollow tube with two large gourd resonators beneath it. The Saraswati veena of Carnatic music is a long-necked lute with fixed frets, its 24 frets set into a ridge of beeswax on the neck. The rudra veena is closely associated with dhrupad and is plucked with a wire plectrum on metal frets.

How do I book a rudra veena (bin) player for a dhrupad concert, an event or a recording?

You can book a rudra veena player through KalaSudha for a concert, event or recording. A rudra veena recital is mostly alap, often an hour or more, and pakhawaj may join for a composition. Ask us through our page to book Indian classical musicians, and hear our artists in KalaSudha's recordings and concert videos.

Have more questions? Contact our support team and we'll be happy to help!

Stay close

Keep KalaSudha close.

Receive news of concerts, learning opportunities, recordings and the work taking shape at KalaSudha.
  • Concert news
  • Learning opportunities
  • Recordings and stories

We respect your privacy. Unsubscribe at any time.